SUPPLYING THE BEST IN SEED CLEANING AND MILLING EQUIPMENT
click on images above for product information that applies to the application
Product Applications – Bucket Elevator
4B has a wide range of sensors for monitoring the various parts of your bucket Elevator. The most common areas for monitoring include: bearing temperature, speed / motion, belt alignment and level / plug indication.
All of 4B’s sensors can be connected to their hazard monitoring systems.
4B also has has an entire line of material handling products, including – elevator buckets, elevator bolts, belting and belt fasteners.
(1) Bearing Temperature Sensor
The sensor screw directly into a bearing housing through the existing grease zerk thread. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor.
(2) Surface Temperature Sensor
Bolts directly onto a bearing housing, motor, gearbox, or machine casing for continuous temperature monitoring.
(3) Belt Misalignment Sensor
Electro-mechanical limit-switch with no moving parts, which detects tracking and misalignment problems on bucket elevators and conveyors.
(4) Speed Switch Sensor
The M800 Elite speed switch is a inductive proximity sensor for monitoring shaft under-speed conditions. With two under speed relay contact outputs and a pulse output, the self contained unit provides the user with easy on site installation and consistent reliability.
(5) Plug / Choke Sensor
Detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs.
Product Application – Drag Chain Conveyors
4B has a wide range of sensors for monitoring the various parts of your drag chain conveyor. The most common areas for monitoring include: bearing temperature, speed / motion, level / plug indication and slack / broken chain detection.
All of 4B’s sensors can be connected to their hazard monitoring systems.
4B also has has an entire line of material handling products, including – drop forged chain.
Watchdog™ Super Elite Hazard Monitor
The Watchdog™ Super Elite processes signals from sensors for belt misalignment, belt speed & slip, continuous bearing temperature, pulley misalignment and plug conditions for bucket elevators or belt conveyors.
T500 Elite Hotbus™ Hazard Monitor
The T500 Elite Hotbus™ is a serial communications system designed to monitor up to 256 sensors on multiple bucket elevators and conveyors for belt speed, belt alignment, bearing temperature, level and plugged conditions.
Illustration shows typical sensor placements, applications may vary.
(1) Bearing Temperature Sensor
The sensor screw directly into a bearing housing through the existing grease zerk thread. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor.
(2) Surface Temperature Sensor
Bolts directly onto a bearing housing, motor, gearbox, or machine casing for continuous temperature monitoring.
(3) Belt Misalignment Sensor
Electro-mechanical limit-switch with no moving parts, which detects tracking and misalignment problems on bucket elevators and conveyors.
(4) Speed Switch Sensor
The M800 Elite speed switch is a inductive proximity sensor for monitoring shaft under-speed conditions. With two under speed relay contact outputs and a pulse output, the self contained unit provides the user with easy on site installation and consistent reliability.
(5) Plug / Choke Sensor
Detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs.
Product Application – Screw Conveyors
4B has a wide range of sensors for monitoring the various parts of your screw conveyor. The most common areas for monitoring include: bearing temperature, speed / motion, level / plug indication and door / gate position.
All of 4B’s sensors can be connected to their hazard monitoring systems.
Illustration shows typical sensor placements, applications may vary.
Watchdog™ Super Elite Hazard Monitor
The Watchdog™ Super Elite processes signals from sensors for belt misalignment, belt speed & slip, continuous bearing temperature, pulley misalignment and plug conditions for bucket elevators or belt conveyors.
T500 Elite Hotbus™ Hazard Monitor
The T500 Elite Hotbus™ is a serial communications system designed to monitor up to 256 sensors on multiple bucket elevators and conveyors for belt speed, belt alignment, bearing temperature, level and plugged conditions.
Drop Forged Conveyor Chain
4B’s drop forged conveyor chain is made of special heat treated alloy steel case hardened to Rockwell C57 – C62 with a ductile core hardness of Rockwell C40. 4B’s superior heat treatment technique provides the optimum chain link with a more resilient ductile core for shock resistance, and an extremely hard exterior surface for superior wear resistance.
(1) Bearing Temperature Sensor
The sensor screw directly into a bearing housing through the existing grease zerk thread. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor.
(2) Surface Temperature Sensor
Bolts directly onto a bearing housing, motor, gearbox, or machine casing for continuous temperature monitoring.
(3) Belt Misalignment Sensor
Electro-mechanical limit-switch with no moving parts, which detects tracking and misalignment problems on bucket elevators and conveyors.
(4) Speed Switch Sensor
The M800 Elite speed switch is a inductive proximity sensor for monitoring shaft under-speed conditions. With two under speed relay contact outputs and a pulse output, the self contained unit provides the user with easy on site installation and consistent reliability.
(5) Plug / Choke Sensor
Detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs.
Product Application – Belt Conveyors
4B has a wide range of sensors for monitoring the various parts of your belt conveyor. The most
common areas for monitoring include: bearing temperature, speed / motion, belt alignment and
level / plug indication .
All of 4B’s sensors can be connected to their hazard monitoring systems.
4B also has has an entire line of material handling products, including – conveyor belting
Illustration shows typical sensor placements, applications may vary.
(1) Bearing Temperature Sensor
The sensor screw directly into a bearing housing through the existing grease zerk thread. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor.
(2) Surface Temperature Sensor
Bolts directly onto a bearing housing, motor, gearbox, or machine casing for continuous temperature monitoring.
(3) Belt Misalignment Sensor
Electro-mechanical limit-switch with no moving parts, which detects tracking and misalignment problems on bucket elevators and conveyors.
(4) Speed Switch Sensor
The M800 Elite speed switch is a inductive proximity sensor for monitoring shaft under-speed conditions. With two under speed relay contact outputs and a pulse output, the self contained unit provides the user with easy on site installation and consistent reliability.
(5) Plug / Choke Sensor
Detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs.
Watchdog™ Super Elite Hazard Monitor
The Watchdog™ Super Elite processes signals from sensors for belt misalignment, belt speed & slip, continuous bearing temperature, pulley misalignment and plug conditions for bucket elevators or belt conveyors.
T500 Elite Hotbus™ Hazard Monitor
The T500 Elite Hotbus™ is a serial communications system designed to monitor up to 256 sensors on multiple bucket elevators and conveyors for belt speed, belt alignment, bearing temperature, level and plugged conditions.
Conveyor Belting
Rubber, PVC and FDA food quality belts are available. Belts vary by style and include: anti-static, high temperature, oil resistant, and flame retardant types.
FDA Food Quality Grade Belts Also Available
Product Application – GRAIN BINS AND SILOS
4B has a wide range of level indicators for point level indication of bulk granular solids or powders in bins and silos.
All of 4B’s sensors can be connected to their hazard monitoring systems.
Illustration shows typical sensor placements, applications may vary.
(1) Rotary Level Indicator
Electro-mechanical rotary level indicators for point level indication of bulk granular materials. Available with vertical extensions up to 14 feet.
(2) Auto-Set™ Level Indicator
RF capacitance point level indicators with push button calibration and material build-up compensation for point level indication of bulk granular materials. Available with vertical extensions up to 33 feet.
T500 Elite Hotbus™ Hazard Monitor
The T500 Elite Hotbus™ is a serial communications system designed to monitor up to 256 sensors on multiple bucket elevators and conveyors for belt speed, belt alignment, bearing temperature, level and plugged conditions.
Watchdog™ Super Elite Hazard Monitor
The Watchdog™ Super Elite processes signals from sensors for belt misalignment, belt speed & slip, continuous bearing temperature, pulley misalignment and plug conditions for bucket elevators or belt conveyors.
T500 Elite Hotbus™ Hazard Monitor
The T500 Elite Hotbus™ is a serial communications system designed to monitor up to 256 sensors on multiple bucket elevators and conveyors for belt speed, belt alignment, bearing temperature, level and plugged conditions.
Drop Forged Conveyor Chain
4B’s drop forged conveyor chain is made of special heat treated alloy steel case hardened to Rockwell C57 – C62 with a ductile core hardness of Rockwell C40. 4B’s superior heat treatment technique provides the optimum chain link with a more resilient ductile core for shock resistance, and an extremely hard exterior surface for superior wear resistance.
